Filter
Top Products
Basic Operations
23
Basic Operations
To record NTSC colour system programmes
NTSC colour signals can be recorded on this VCR.
For tape speed, select SP or EP in step 4.
EP provides recording time three times as long as SP, however, SP produces
better picture quality.
When playing back, the VCR automatically detects the tape speed.
Tips
• To select a programme position, you can use the programme number buttons on the
remote commander. For two-digit numbers, press the -/-- (ten’s digit) button
followed by the number buttons.
• You can select a video source from the LINE-1 IN or LINE-2 IN jacks using INPUT
SELECT.
• To cut out an unwanted scene while recording, press P PAUSE and turn the DUAL
MODE SHUTTLE ring on the VCR to rewind the tape to the beginning of the
unwanted scene, then press P PAUSE to resume recording.
• The display appears on the TV screen indicating information about the tape, but the
information won’t be recorded on the tape.
• If you don’t want to watch TV while recording, you can turn off the TV.
Notes
• The display does not appear during still (pause) mode or slow-motion playback.
• The display will not appear while playing an NTSC-recorded tape.