Filter
Top Products
Basic Operations
25
Basic Operations
TIMER SET / CHECK WE
25.1
DATE START STOP PROG
2.5
12
– : –– –: –– ––
SP
– .–– –: –– –:–– –– –
– .–– –: –– –:–– –– –
– .–– –: –– –:–– –– –
– .–– –: –– –:–– –– –
– .–– –: –– –:–– –– –
– .–– –: –– –:–– –– –
– .–– –: –– –:–– –– –
WE
2
2 Set the date, start and stop times,
programme position, and tape speed:
1 Press CURSOR / to flash each item in
turn.
2 Press CURSOR >/. to set each item.
To correct a setting, press CURSOR ? to
return to that setting and reset.
To record the same programme every day or the same day every
week, press CURSOR . while the date is flashing. For details, see
“Daily/weekly recording” on page 26.
To record from a source connected to the LINE-1 IN or LINE-2 IN
jacks, press INPUT SELECT to display “L1” or “L2” in the “PROG”
position.
3 Press CURSOR / to confirm the setting.
The cursor (z) appears at the top of the line. To enter another
setting, move the cursor to the next line and repeat step 2.
4 Press EXECUTE.
5 Press u to turn off the VCR.
The TIMER indicator appears in the display window and the VCR
stands by for recording.
To record from other equipment, leave the connected equipment on.
To stop recording
To stop the VCR while recording, press p STOP.
•CURSOR
continued
•CURSOR
•
•EXECUTE