Filter
Top Products
Getting Started
8
1 Press ON/STANDBY to turn on the VCR.
2 Press PROGRAM +/– until “L1” appears in the display window.
3 Turn on your TV and select a programme position for video
playback.
Choose a channel between UHF 30 and 39 on the TV, where there is
no picture and no sound or only a steady rustling sound.
This channel will now be referred to as the video channel.
4 Tune the TV so that a blue screen appears on the TV screen.
Refer to your TV manual for tuning instructions.
You have now tuned your TV to the VCR. From now on, whenever
you want to play a tape, set the TV to the video channel.
If the blue screen does not appear clearly, see “To obtain a clear blue
screen” on page 9.
PROGRAM
+
–
Step 4
ON/STANDBY
Tuning your TV to the VCR
If you have connected your VCR to the TV using the audio/video cable, skip
this step.
ON/STANDBY
PROGRAM +/–