Filter
Top Products
Getting Started
19
Connecting the VCR
Additional connections
To a stereo system
You can improve sound
quality by connecting a
stereo system to the R/D
L/G jacks as shown on the
right.
To use the Line Through
function when
connecting to video
equipment other than a
Set-Top Box
Using the Line Through
function, you can watch
programmes from other
equipment connected to this
VCR on the TV even when
the VCR is turned off. When
you turn on the other
equipment, this VCR
automatically sends the
signal from the other
equipment to the TV without turning itself on.
Note
• You cannot watch programmes on the TV while recording unless you are recording
a programme from other equipment.
1
Connect the other equipment to the DECODER/LINE-3 IN connector as
shown above.
2
Set DECODER/LINE3 to LINE3 in the OPTIONS-2 menu.
3
Set POWER SAVE to OFF or PARTIAL in the OPTIONS-2 menu.
4
Turn off the VCR.
To watch a programme, turn on the other equipment and the TV.
Audio cable (not supplied)
R/D L/G
LINE IN
: Signal flow
Scart cable (not supplied)
DECODER/
t LINE-3 IN
LINE OUT
: Signal flow