Filter
Top Products
62
Recording TV programmes using the ShowView system
2
Press the programme number
buttons to enter the ShowView
number.
If you make a mistake, press
CLEAR and re-enter the correct
number.
3
Press OK.
The date, start and stop times,
programme position or station name,
tape speed, and VPS/PDC setting
appear on the TV screen.
• If “– –” appears in the “PROG.”
(programme) column (this may
happen for local broadcasts), you
have to set the appropriate programme position manually.
Press M/m to select the desired programme position.
• To record from a decoder or other source connected to one or
more of the LINE inputs, press INPUT SELECT to display the
connected line in the “PROG.” position.
• To record from the Set-Top Box, press STB to display “STB---” in
the “PROG.” position. Then, enter a three digit STB channel
number with the programme number buttons.
You will only have to do this operation once for the referred
channel. The VCR will then store your setting.
When you have selected A (Austria), CH (Switzerland), or D
(Germany) with the country selection in the Auto Set Up procedure,
the VPS/PDC function is automatically set to ON.
For details about the VPS/PDC function, see “Timer recording with
VPS/PDC signals” on page 63.
If the information is incorrect, press CLEAR to cancel the setting.
123
456
789
0
CLEAR
MENUEXIT :
SHOWVIEW
SET :
–
0–9
SHOWVIEW NO.
1246––– –
FRI28.9
CANCEL
CONFIRM
:
:
OK
CLEAR
CLEAR
OK
PLAY
INPUT SELECT
STB
123
456
789
0
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENUEXIT :
TIMER
SP / LP
LIST
TIME PROG.
TODAY 519:00 20:00 3
SP VPS / PDC OFF
FRI28.9