Filter
Top Products
E:\3077145111DVPCX875P\01US08PLY2-
UC.fm
master page=left
DVP-CX875P
3-077-145-11(1)
54
Searching for a disc on the Disc
Explorer
1 Press FOLDER repeatedly to select the
folder with the disc you want to play.
With each press, the folder indication in
the Disc Explorer display changes as
follows:
2 Select the disc by one of the following
operations.
•press X/x
• after sliding the TV/DISC
EXPLORER/DVD switch to DISC
EXPLORER or DVD, press the number
buttons and ENTER
• after sliding the TV/DISC
EXPLORER/DVD switch to DISC
EXPLORER or DVD, press DISC
SKIP +/–
• press DISC CHANGE on the player to
turn the indicator on, followed by
turning the
.–/>+ dial on the
player and then pressing it.
3 Press ENTER.
The Disc Explorer disappears and
playback starts.
To turn off the Disc Explorer
Press ORETURN.
z Hint
When you select the disc with the number buttons in
Step 2, you can use it to jump through the Disc
Explorer display.
For example, you can press number button 6 and
then press ENTER to view the Disc Explorer for
disc slot numbers 6 to 10, then press 11 and ENTER
to view the Disc Explorer for the next five disc slots
(number 11 to 15).
.
Notes
• If you press the FOLDER button during playback,
the playback stops and the Disc Explorer appears.
In this case, the Resume Play is not available.
• If you have inserted a disc whose disc information
has not been loaded yet, you cannot select and
play the disc on the Disc Explorer. The player
skips the disc whose information differs from the
loaded disc information, and plays the next loaded
disc.
• If you load or try to play an empty slot, it appears
as a blank in the Disc Explorer. You cannot select
this.
• Even if the disc has a jacket picture recorded on it,
the jacket picture may not appear on the Disc
Explorer.
.–/>+ dial
Number
buttons
ALL t DVD t CD t A t B t C t D