Filter
Top Products
D:\##sagyou\#05 May\824163S
DVPNC555ES_US\3082036112
DVPNC555ES_US\01US12SET-U2.fm
master page=left
DVP-NC555ES
3-082-036-11(2)
76
• 48kHz/96kHz PCM (DVD VIDEO only)
Selects the sampling frequency of the audio
signal.
Notes
• Even if you set “48kHz/96kHz PCM” to “96kHz/
24bit,” the sampling frequency is converted to
48kHz/16bit when a “SURROUND” mode (page
56) is selected.
• The analog audio signals from the AUDIO OUT
L/R jacks and 5.1CH OUTPUT jacks are not
affected by this setting and keep their original
sampling frequency level.
Settings for the Speakers
(SPEAKER SETUP)
To obtain the best possible surround sound,
set the size of the speakers you have
connected and their distance from your
listening position. Then use the test tone to
adjust the volume and the balance of the
speakers to the same level.
This setting is effective when connecting the
speaker with 5.1 CH OUTPUT jacks (page
25).
You can create two different Speaker Setup
settings, one for Super Audio CDs and one for
all other types of discs.
1 Follow steps 1 through 4 of “Using
the setup display” (page 69) to
select “SPEAKER SETUP” in the
Setup display.
2 Select “DVD” or “SUPER AUDIO
CD” using X/x, then press ENTER.
Example: when “DVD” is selected.
3 Set the following items in the
order that they are explained
below.
The default settings are underlined.
48kHz/16bit The audio signals of DVD
VIDEOs are always converted
to 48kHz/16bit.
96kHz/24bit All types of signals including
96kHz/24bit are output in their
original format. However, if the
signal is encrypted for
copyright protection purposes,
the signal is only output as
48kHz/16bit.
SPEAKER SETUP
SUPER AUDIO CD:
DVD:
SPEAKER SETUP
(DVD)
DISTANCE:
LEVEL(FRONT)
:
LEVEL(REAR)
:
OFF
TEST TONE:
FRONT:
CENTER:
YES
LARGE
LARGE
LARGE
REAR:
SUBWOOFER:
SIZE: