Sony DVP-NC600 DVD Player User Manual


 
67
Settings and Adjustments
Custom Settings
(CUSTOM SETUP)
Allows setting up Parental Control and other
settings.
Select CUSTOM SETUP in the Setup
Display. For details on using the display, see
Using the Setup Display (page 63).
The default settings are underlined.
xLINE
Selects the method of outputting video
signals from the LINE (RGB)-TV jack on the
rear panel of the player.
If your TV does not conform to the S video or the
RGB signals, no picture appears on the TV screen
even if you select S VIDEO or RGB. Refer to
the instructions supplied with your TV.
If your TV has only one SCART (EURO AV) jack,
do not select S VIDEO.
xAUTO PLAY
Selects the Auto Play setting when you turn
on the player.
xDIMMER
Adjusts the lighting of the front panel
display.
xPAUSE MODE (DVD only)
Selects the picture in pause mode.
xPARENTAL CONTROL t (DVD
only)
Sets a password and playback limitation level
for DVDs with playback limitation for
children. For details, see Limiting playback
by children (Parental Control) (page 57).
VIDEO Outputs the video signals.
S VIDEO Outputs the S video signals.
RGB Outputs the RGB signals.
Notes
CUSTOM SETUP
LINE:
AUTO PLAY:
DIMMER:
PAUSE MODE:
VIDEO
OFF
BRIGHT
AUTO
OFF
TRACK SELECTION:
PARENTAL CONTROL
OFF Does not use TIMER, DEMO1,
or DEMO2 to start playback.
TIMER Starts playing when the player is
turned on. The player can be played
at any time when connected to a timer
(not supplied). Set the timer when the
player is in standby mode (the power
indicator lights up in red).
DEMO1 Starts playing the first demonstration
automatically.
DEMO2 Starts playing the second
demonstration automatically.
BRIGHT
Makes the front panel display bright.
DARK Makes the front panel display dark.
OFF Turns off the lighting of the front
panel display.
AUTO
The picture, including subjects that
move dynamically, is output with no
jitter. Normally, select this position.
FRAME The picture, including subjects that
do not move dynamically, is output in
high resolution.