Filter
Top Products
16
Step 3: TV Hookups
Connect the supplied audio/video cord and the power cord in the order (1 ~3) shown below.
Be sure to connect the power cord last.
Depending on the TV type, the image of
some discs may not fit your TV screen.
If you want to change the aspect ratio, please
refer to page 63.
When connecting to a monaural TV
Use a stereo-mono conversion cord (not
supplied). Connect the LINE OUT (VIDEO)
jack on the player to the TV’s video input
jack, and connect the LINE OUT L/R
(AUDIO) jacks to the TV’s audio input jack.
For Asian/Oceanian models only
To change the color system
The color system of the player is set to NTSC
or PAL. If the on-screen menu of the player
does not appear on the TV, change the color
system of the player to the same color system
(PAL or NTSC) of your TV. To change the
color system, hold ?/1 down for a few
seconds while pressing X on the player.
z Hint
To check the current setting of the player’s color
system, press ?/1. The ?/1 indicator lights up in
green. When “NTSC” appears on the front panel
display, the color system of the player is set to
NTSC. When “NTSC” does not appear, the color
system is set to PAL.
1 Audio/video
cord (supplied)
2 Power source
CD/DVD Player
to video input
to audio input
TV
to LINE OUT
(VIDEO)
to LINE OUT
L/R (AUDIO)
3 Power source
LINE OUT
l : Signal flow