Filter
Top Products
27
Hookups
14Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 22 to
24 ( through ).
• OFF (page 73)
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 73)
15Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 22 to
24 ( through ). Each of these is the
default setting and does not need to be adjusted
when you first connect the player. Refer to
page 67 for using the Setup Display.
Audio Connection (pages 21 to 24)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 73).
• If the sound distorts even when the volume
is turned down, set “AUDIO ATT” to “ON”
(page 72).
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 73).
• Set “DIGITAL OUT” to “ON” (page 73).
B D
B-2 C-2
D
B D
A
B-1
C-1
B-2 C-2 D