Sony DVP-NS300 DVD Player User Manual


 
Hookups
23
This connection will allow you to use the Dolby Digital, or DTS decoder function of your AV
amplifier (receiver). You are not able to enjoy the TVS sound effects of the player.
xRecommended surround sound effects using this connection with your amplifier (receiver)
Dolby Digital (5.1ch) (page 64)
DTS (5.1ch) (page 64)
zTo enhance the surround sound effects, refer to the operating instructions of the amplifier (receiver) for correct
speaker setting location.
Note
After you have completed the connection, be sure to set DOLBY DIGITAL to DOLBY DIGITAL(page 24).
If your AV amplifier (receiver) has a DTS decoder, set DTS to ON (page 28). Otherwise, no sound or a loud
noise will come from the speakers.
Connecting to an AV amplifier (receiver) with a digital input jack having a
Dolby Digital, or DTS decoder, and 6 speakers
D
PCM/DTS/
DOLBY DIGITAL
S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL
OPTICAL
R-AUDIO 1-L VIDEO 1
Y
P
B
P
R
R-AUDIO 2-L VIDEO 2
DIGITAL OUT LINE OUT
OPTICAL
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
COAXIAL
D
Front
(R)
Rear
(R)
AV amplifier (receiver) with a decoder
Subwoofer
Center
[Speakers] [Speakers]
CD/DVD player
or
l: Signal flow
Coaxial digital cord
(not supplied)
to optical digital input
to coaxial digital input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
Front (L)
Rear
(L)