Filter
Top Products
11
Remote Control
Programming the Remote Control
If you have video equipment other than Sony brand (or if you have a Sony DVD/VCR
combination unit) that you want to control with the TV’s remote control, use the following
procedure to program the remote control.
1 Check the list of “Manufacturer’s Codes” on page 12 and find the three-digit code number
for the manufacturer of your component. If more than one code number is listed, use the
number listed first.
2 Press .
3 Press or FUNCTION button to indicate the type of component you want to
program with the remote control.
4 Use the buttons to enter the three-digit manufacturer’s code number.
5 Press .
6 To check if the code number works, aim the TV’s remote control at the component and
press the green
POWER button (VCR/DVD, SAT/CABLE) that corresponds with that
component. If it responds, you are done. If not try using another code listed for that
manufacturer.
✍ The and FUNCTION button flash when you press .
✍ You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 3.
✍ If you have problems programming your remote control, see the remote control troubleshooting
section on page 60.
0 9
01US01COV-BR2.book Page 11 Monday, March 28, 2005 1:36 PM