Sony KD 32FS130 CRT Television User Manual


 
24
Connections
Connecting a DVD Player using Composite Video (VIDEO/AUDIO L(MONO),R)
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your DVD player
to AUDIO/VIDEO IN on your TV.
Optional connection
For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does
not provide sound, so you still must connect the audio cables.
Connecting a DVD Player using Component Video (Y PB PR R L)
If your DVD player is equipped with component video outputs (Y PB PR), you can improve the
picture quality by using component video cables (480i only).
1 Make sure your DVD player is set up (see page 59). Using component video cables (not
supplied), connect Y P
B PR OUT on your DVD player to Y PB PR IN on your TV.
2 Connect AUDIO OUT on your DVD player to AUDIO IN on your TV.
Using your TV with this connection
Program your Sony remote control to operate your DVD (see “Programming the Remote
Control” on page 11).
To activate your remote, press the
FUNCTION button to operate your DVD.
Press repeatedly to switch to the DVD player's input (VIDEO input).
The Y PB PR outputs on your DVD player are sometimes labeled Y, CB, and CR or Y, B-Y, and R-Y. If so,
connect the cables to like colors.
Rear of TV
Rear of DVD Player
Audio R (red)
Audio L (white)
Video (yellow)
Optional connection
Rear of DVD Player
2
Rear of TV
Audio L (white)
Audio R (red)
P
R
(red)
P
B
(blue)
Y (green)
1
01US01COV-BR2.book Page 24 Monday, March 28, 2005 1:36 PM