Filter
Top Products
46
Setup
DVD Player or
Digital Satellite
Receiver via AV
Receiver with
CENTER SPEAKER
IN Terminals
Use this connection if you have a digital audio device that is PCM/Dolby
Digital compatible, such as an AV Receiver with a Dolby Pro Logic system
decoder.
To connect a DVD player or digital satellite receiver via AV receiver with
CENTER SPEAKER IN terminals
1 Using a SPEAKER cord, connect the TV’s CENTER SPEAKER IN
terminals to the AV Receiver’s CENTER SPEAKER OUT terminals.
2 Using a component video cable, connect the DVD player or Digital
Satellite Receiver’s Y, P
B and PR jacks to the Y, PB and PR jacks on the
TV. Use the HD/DVD IN 4 connections. Using an Audio cable, connect
the DVD player or Digital Satellite Receiver to the TV’s AUDIO IN
jacks.
3 Using an optical digital cable, connect the DVD player or Digital
Satellite Receiver’s OPTICAL OUT jack to the AV Receiver’s
OPTICAL IN jack.
If your DVD player does not have component (Y, PB, PR) jacks,
you can connect the DVD player with A/V connectors, use the
connection described on page 43.
If your Digital Satellite Receiver has a HDMI connector, for best
picture quality, use the connection described on page 44.