Sony KDE-50XS955 Flat Panel Television User Manual


 
52
Setup
KDE-50XS955
CAUTION: Inserting the CableCARD
incorrectly may result in permanent
damage to the card and the TV.
3 Gently push the card into the slot until it locks into place.
4 Turn on the TV. After 1-2 minutes, the CableCARD
setup screen is
displayed. This screen includes information your cable TV company
will request before they can activate your service.
5 Follow the displayed instructions: Phone your cable TV company. A
representative will guide you through the activation process.
6 After your CableCARD
is activated, your cable TV company will
download the service information, including the channel list, to the
CableCARD
.
After the CableCARD
has acquired channels from your cable TV
company, the TV tunes to the lowest available channel.
Removing the
CableCARD
In the event you want to cancel your service, contact your cable TV
company.
1 Turn off the TV.
2 Push the eject button on the TV’s CableCARD
slot to release the card.
3 Pull the CableCARD
straight out of the slot to remove it.
To install a different CableCARD
, follow the instructions in “Activating
CableCARD
Service” on page 51.
CableCARD
z You can also access
information about your
CableCARD
in the
Applications Menu (see
page 108).
Once the CableCARD
is removed, your TV will no longer
decrypt digital cable TV programming services that require
CableCARD
.
Eject button