Filter
Top Products
18
Overview of the TV Controls and Connectors
Front Panel Controls and Connectors
To open the drop-down panel
To open the drop-down panel of your TV, push up the panel
door just under the
mark until you hear a click, then the
panel door will open.
S VIDEO VIDEO L AUDIO R
INPUT
VOLUME CHANNEL
VIDEO IN 2
(MONO)
1
2
3
4
56 7 8 9 0
Item/Jack Description
1 (IR) Infrared Receiver
2 (Timer) LED
3 (Picture off)
LED
4 1 (Power) and
1 (Power on/Stand by)
LED
5 i Headphones jack
6 S VIDEO IN 2
7 VIDEO/L-AUDIO-R
VIDEO IN 2
8 INPUT
9 – VOLUME +
0 – CHANNEL +
Receives IR signals from the remote control.
When lit, indicates one of the timers is set. When the timer is set, this LED will remain lit. For details, see
page 75.
When lit, indicates that the Picture Off feature is activated. For details, see page 48.
Press 1 (Power) to turn on and off the TV. The LED lights up green when the TV is turned on. When in
standby mode, the LED lights up in red. If the LED blinks continuously, this may indicate the TV needs
servicing (see page 77).
Connects to your headphones.
If your headphones do not match the jack, use a suitable plug adaptor (not supplied).
Connects to the S VIDEO OUT jack on your camcorder or other video equipment that has S VIDEO.
Provides better picture quality than composite video (7).
Connects to the composite A/V output jacks on your camcorder or other video equipment.
Press repeatedly to cycle through the video equipment connected to the TV’s video inputs.
Press to adjust the volume.
Press to scan through channels. To scan quickly through channels, press and hold down either CHANNEL.