Filter
Top Products
36
To watch VHF/UHF channels with an antenna
1 Press MENU.
2 Press V/v to select (Channel), then press
.
3 Press V/v to select “Cable,” then press .
4 Press V/v to select “Off,” then press .
5 Perform steps 3 - 5 in “To perform Auto
Program again” above.
Note
You cannot receive and set the cable TV channels and VHF/
UHF channels at the same time.
Tip
When you have a cable box or satellite receiver connected, the
Channel Fix feature is useful. For details, see page 37.
To skip channels
You can skip unnecessary channels when selecting
channels using the CH +/– buttons.
1 Press MENU.
2 Press V/v to select (Channel), then press
.
3 Press V/v to select “Channel Skip/Add,” then
press
.
4 Press V/v to select the channel you want to skip,
then press
.
Tip
To scroll through the list, press and hold V/v.
5 Press V/v to select “Skip,” then press .
If you want to re-enter the skipped channel,
select “Add.”
6 Press MENU to exit the menu screen.
Example: Select this to skip channel 5.
TV
Exit:
Set:Back:Select:
Channel
Return
1: Skip
2: Add
3: Add
4: Skip
5: Add
6: Skip
7: Skip
8: Add
Channel Skip/Add
TV
Exit:
Set:Back:Select:
Channel
Return
1: Skip
2: Add
3: Add
4: Skip
5: Skip
6: Skip
7: Skip
8: Add
Channel Skip/Add
Skip
Add
TV
Exit:
Set:Back:Select:
Channel
Return
1: Skip
2: Add
3: Add
4: Skip
5: Skip
6: Skip
7: Skip
8: Add
Channel Skip/Add