Filter
Top Products
18
Installing and Connecting the TV
Connecting a Digital Satellite Receiver
Disconnect all power sources before making any connections.
1 Using a component video cable, connect the Digital Satellite Receiver’s
Y, P
B and PR jacks to the Y, PB and PR jacks on the TV. Use the VIDEO 3
IN connections.
Note
Component video (Y, PB, PR) connection is necessary to view 480p, 720p, and 1080i
formats. Note that this TV displays all format types of picture in a resolution of
1,280 dots × 768 lines.
2 Using an AUDIO cable, connect the Digital Satellite Receiver’s AUDIO
OUT jacks to the TV’s AUDIO IN jacks.
Note
The Y, PB and PR jacks do not provide audio, so audio cables must be connected to
provide sound.
VIDEO OUT
TYPE
1
L1 L2
Y
Pb
Pr
R1
AUDIO OUT
OPTICAL
DIGITAL
AUDIO
OUT
R2
2
COMPONENT OUT
(1080i/720p/480p/480i)
S VIDEO
OUT
Digital Satellite Receiver
(e.g. SAT-HD200, SAT-HD300, etc.)
AUDIO cable
(not supplied)
Rear of TV
Component video
cable (not supplied)
P
R
PB
Y
AUDIO-R (red)
AUDIO-L (white)