Filter
Top Products
60
Option
Treble*
Bass*
Balance*
Effect**
* To adjust any of these options, set “Speaker” in the
(Audio) menu to “On,” or “Audio Out” to
“Variable” first.
** To adjust the option, set “Speaker” in the
(Audio)
menu to “On” first.
Tip
You can adjust each option by referring to the value beside
each option indicator.
5 Repeat steps 3 and 4 to adjust other options.
6 Press MENU to exit the menu screen.
To reset to the factory settings
Press RESET while the menu is on the screen and
the cursor is located on the right side of any menu
item. When the pop-up window or bar indication is
displayed, only the menu item being adjusted is reset
to the factory settings.
Note
Resetting the unit to the factory settings resets only “Treble,”
“Bass” and “Balance.”
MTS/SAP
Press MTS/SAP repeatedly until the desired sound
indication appears.
Each time you press the button, the sound indication
changes as follows:
Sound indication*
Stereo
Auto SAP
Mono
* This is available only for VHF/UHF input.
1, 5
2 - 4
Description
Select for stereo reception when
viewing a program broadcast in stereo.
Select to automatically switch the TV
to second audio programs when a signal
is received. (If no SAP signal is
present, the TV remains in Stereo
mode.)
Select for mono reception. (Use to
reduce noise during weak stereo
broadcasts.)
Mono
Auto SAP
Stereo
,
Selecting Stereo or
Bilingual Programs
You can enjoy stereo, bilingual and mono programs.
Press V/b
To increase higher-
pitched sounds.
To increase lower-
pitched sounds.
To emphasize the
right speaker.
Press v/B
To decrease higher-
pitched sounds.
To decrease lower-
pitched sounds.
To emphasize the
left speaker.
See page 44.
FAVORITES
TV
VIDEO 1/2 VIDEO 3 VIDEO 4
F1
F2
MENU
RESET MTS/SAP
GUIDE
TV/SAT
TOP MENU
FREEZE