Sony KP 61S70 Projection Television User Manual


 
15
3 Press CHANNEL + to select English,
CHANNEL – to select Español or
VOLUME + to select Français.
The screen will change to reflect your
choice.
4 Press VOLUME – to continue.
5 Press CHANNEL + to preset channels
automatically.
CHANNEL
–+
VOLUME
–+
Auto Program
No :
Auto Program ?
Continue to
Yes :
[CH–]
[CH+]
“Auto Program” appears and the
projection TV starts scanning and
presetting channels automatically. While
scanning, the received channel will be
displayed on the sub screen. When all the
receivable channels are stored, the lowest
numbered channel is displayed.
To perform AUTO SET UP again
Press SET UP inside the drop-down panel on
the projection TV and perform steps 3-5 on
pages 14 and 15.
Press SET UP again to exit.
Adjusting the Convergence
Automatically (FLASH FOCUS)
The projection tube image appears on the
screen in three layers (red, green and blue). If
they do not converge, the color is poor and
the picture blurs.
Before you use your projection TV, be sure to
adjust the convergence.
The FLASH FOCUS feature allows you to
adjust the convergence automatically.
Tips
z
It is recommended to perform FLASH FOCUS about
30 minutes after the projection TV is first turned on.
You can also perform FLASH FOCUS using the Set
Up menu on page 31.
Press FLASH FOCUS.
The cross pattern appears and FLASH
FOCUS begins to work. The adjustment is
completed when the cross pattern becomes
white.
Note:
FLASH FOCUS is canceled if you
perform any other function while FLASH
FOCUS is working.
VOLUME
–+
CHANNEL
–+
Oprima
[
SET UP
]
para
salir.
Primero conecte la
antena.
[VOL–]
[CH–]
[CH+]
[VOL+]
Auto Set Up :
Español :
English :
Français :
FLASH FOCUS