Filter
Top Products
Connecting Your TV
5
Connecting Additional Equipment
TV and VCR
1 Connect the coaxial cable from your TV antenna or cable service to the IN jack on your
VCR.
2 Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF
jack on the TV.
Optional connection
If your VCR is equipped with video outputs, you can get better picture quality by connecting
Audio/Video cables (not supplied) from AUDIO and VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
To watch video programs from your VCR, tune your TV to channel 3 or 4 (as set on the rear
of your VCR).
You can use the button to switch between the VHF/UHF and VIDEO inputs.
For better picture quality, use S VIDEO instead of the yellow Audio/ Video cable. S VIDEO
does not provide sound; the audio cables must still be connected.
Optional connection
From
VCR
2
Rear of TV
cable/
1
antenna
Video (yellow)
Audio L (white)
Audio R (red)