Filter
Top Products
4
Operating Instructions
Connecting Additional Equipment
TV and VCR
1 Connect the coaxial cable from your TV antenna or cable service to
the IN jack on your VCR.
2 Connect a coaxial cable (not supplied) from the OUT jack on your
VCR to the VHF/UHF jack on the TV.
Optional connection
If your VCR is equipped with video outputs, you can get better picture
quality by connecting Audio/Video cables (not supplied) from AUDIO
and VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
To watch video programs from your VCR, tune your TV to channel 3 or 4 (as
set on the rear of your VCR).
You can use the button to switch between the VHF/UHF and VIDEO
inputs.
For optimum picture quality, use S VIDEO (if your VCR is equipped with the
S VIDEO connection) instead of the yellow Audio/ Video cable. S VIDEO does
not provide sound, the audio cables must still be connected.
Optional connection
From
VCR
2
Rear of TV
cable/
Coaxial
Cable
1
antenna
Video (yellow)
Audio L (white)
Audio R (red)