Filter
Top Products
Using the Menus
33
Options Menu
Cable ON: Select if you are receiving cable channels with a CATV
cable.
OFF: Select if you are using a TV antenna.
Auto Program Perform Auto Program whenever setting up your TV.
It will cycle through all available channels and program
receivable channels.
Tilt Correction
Press F or
f to correct any tilt of the picture from –5 to +5,
then press
to activate.
To Display To Highlight
To Select
To access the Options menu, first open the Setup menu, then refer to the
following steps:
Tilt Correction: 0
Cable: ON
Auto Program
Options
Move Select End
MENU
After changing your cable settings, you will need to perform Auto Program.