Filter
Top Products
Using the Menus
31
Using the Timer Menu
Current Time 1 Press F or f to select the current time, then press .
(If you are in Daylight Saving time, be sure to set the
Daylight Saving mode in “YES”)
2 Press F or
f to enter the correct time, then press .
3 Press
to exit the menu.
Timer 1 and
Timer 2
Scheduled
viewing
With the menu open, set cursor on Timer 1 or Timer 2:
1 Press F or
f to select Timer 1 or Timer 2, then press .
2 Press F or
f to enter your time and channel of
preference, then press
.
3 Press
to exit the menu.
Daylight
Saving
YES: Select in spring to compensate for Daylight Saving.
NO: Select in fall at the end of Daylight Saving.
To access the Timer menu, refer to the following steps:
Timer 1: Set
Timer 2: Set
Current Time
Daylight Saving: NO
:
AM
Timer
Move Select End
MENU
To Display To Highlight To Select
You must set the Current Time before you can use Timer 1 and Timer 2.
You can set the Timer to ON, OFF, or Set. Once the timer is set, you can turn it
on or off without having to go through the settings.
When you perform Auto Program, all Timer 1 and Timer 2 settings will be
cleared.
Any loss of power will cause Current Time, Timer 1 and Timer 2 settings to be
cleared.