Filter
Top Products
Installing the TV
26
Connecting a Camcorder
For easy connection of the camcorder, the TV has front Audio and
Video inputs (shown below). If you prefer, you can connect the
camcorder to the TV’s rear Audio and Video IN jacks.
1 Using A/V cables, connect the camcorder’s Audio and Video
OUT jacks to the TV’s Audio and Video IN jacks.
If you have a mono camcorder, connect its audio output to the TV’s
AUDIO L jack.
To view the camera’s output
❑
Use the TV/VIDEO button on the front panel of the TV (or on the
remote control) to set the TV to the video input to which the
camcorder is connected. (VIDEO 2 in the illustration above.)
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
A/V output
✍ If the camcorder you are connecting has an S VIDEO jack, you can use an
S VIDEO cable for improved picture quality (compared to a combination audio/
video cable). Because S VIDEO cables carry only the video signal, you will also
need audio cables for sound.