Filter
Top Products
Other Information
50
Programming the Remote Control
The remote control is preset to operate Sony brand video equipment.
If you have video equipment other than Sony brand that you want to
control with the TV’s remote control, use the following procedures to
program the remote control.
From the “Manufacturer’s Codes” listed on page 52, select the three-
digit code number for the manufacturer’s code for your equipment. If
more than one code number is listed, start with the number listed
first. Use the code number to complete the following procedure.
1 Move the slide switch to the desired equipment type.
2 Press CODE SET.
3 Press the white function button for the type of equipment you
want to control with the TV’s remote control (VCR/DVD or
SAT/CABLE).
4 Enter the three-digit manufacturer’s code number.
5 Press ENTER.
6 To check if the code number works, aim the TV’s remote control
at the equipment and press the green POWER button that
corresponds with that equipment. If it responds, you are done. If
not, try using the other codes listed for that manufacturer.
Sony
Equipment
Switch Position
on Remote Control
Programmable
Code Number
Beta, ED Beta VCRs AV1 303
8 mm VCR AV2 302
VHS VCR AV3 301
DVD Player DVD 751
✍ The equipment must have infrared (IR) remote capability in order to be used
with the remote control.
✍ You must perform step 3 within 10 seconds of step 2, or you must start
again from step 2.
TV
VCR/DVD SAT/CABLE
POWER
CODE SET
ENTER
DVD MENU
REC
SLEEP
1
2
3
456
7
89
0
MUTING
VCR/DVD
SAT/CABLE
FUNCTION
TV
TV/VIDEO
2
4
MENU
VOL
FAVORITES
CH
AV 1 2 3 DVD RESET
RM -Y183
FREEZE
3
1
5