Filter
Top Products
22 (GB)
Using On-screen Menus
User Memory menu
This menu is used for saving or recalling the settings
in the Picture/Sound Control and Screen Control
menus.
,toselect, , to
ENTER
User Memory
Load
Save
enter set menu
For details, see “Using the Memory Function” on page
37 (GB).
Load
Recalls the preset settings.
Save
Saves the settings.
Remote menu
This menu is used for remote control settings.
,toselect, toset
ENTER
Remote
Index Number : 1
Remote Mode : TV
Remote Only :
Sync Mode :H/Comp
Index Number
Sets the index number of the display.
Note
When you set the number, use the buttons on the
display unit. The Index Number cannot be set with the
Remote Commander.
For details about the Index Number, see “Operating a
Specific Display With the Remote Commander” on page
45 (GB).
Remote Mode
Selects the Remote Commander mode.
TV: The Sony display’s or the TV’s commander
PJ: The Sony projector’s commander
Off: Disables the remote control.
Note
When you change the Remote Commander mode, use the
buttons on the display unit. You cannot change the
Remote Commander mode with the Remote Commander.
For details, see “Using Other Remote Commander
Models” on page 47 (GB).
Remote Only
Select On to disable the control buttons on the display
unit. The display can only be controlled with the
Remote Commander.
To cancel the Remote Only mode, set Remote Only to
Off with the Remote Commander.
Note
The setting in this item is still retained when the AC
power cord is disconnected or when you turn the
display on/off with the Remote Commander.
Input Select Menu
This menu is used to switch the input signal.
For details on switching the input signal, see “Switching
the Input Signal” on page 24 (GB).
Unit Status menu
This menu is used for displaying the internal status of
the display unit.
,toselectitem
Uni t Status
Mode l Name : PFM-32C1
Serial Number: 2000001
Opera t i on Time: 00001H
Sof tware Version: 1.00
Temperature: OK
Fan: OK
Sync Mode : H/Comp
Model Name
Indicates the model name.
Serial Number
Indicates the serial number.
Operation Time
Indicates the total number of hours of operation.
Note
The standby mode is not counted as part of the
Operation Time.
Software Version
Indicates the system software version.