Filter
Top Products
20 Using the menus
To schedule or edit an
event
The Schedule pane displays up to seven previously scheduled events at a time.
If more than seven events are already scheduled, use the navigation buttons to
scroll down to view the additional events. Small arrows at the top or bottom of
the list indicate that there are additional events.
You can schedule events up to
eleven months in advance.
To schedule a program:
1. Highlight an upcoming program in the program guide and press
SELECT.
Press
SELECT again to cycle through the next available option.
If you choose a scheduling option, the DIRECTV
®
Receiver will turn on (if
necessary) and tune to the specified channel at the chosen date and time.
2. If you chose Schedule to Tape (SAT-A65A only) and you have set up your
VCR (see 7), the DIRECTV Receiver will record the event. For unattended
recording:
– Attach the VCR Control Cable and set up your VCR.
– Set your VCR for the correct DIRECTV Receiver output: RF (channel
3/4) or A/V (phono or S-Video).
– Insert a blank videotape and leave the VCR turned on.
Select Delete Event to clear a
scheduled event.
3. Use the navigation buttons to specify AM or PM (or N for noon, or M for
midnight if the you specified12:00).
4. Use the same procedure to set the program Length in hours and minutes.
5. Use the navigation buttons to advance to the Frequency column.
6. Specify when, or how often, the event occurs: Today, Tomorrow, Every Mon,
Every Tue, Every Wed, Every Thu, Every Fri, Every Sat, Every Sun,
Everyday, Mon-Fri, or “/” (specify a date).
If you specify a date, use the
month/day format. The year is set
automatically.
7. After setting the Frequency, use the navigation buttons to advance.
8. Review your settings and choose OK, or choose Cancel to delete the edits.
To cancel a program scheduled for viewing or taping:
Find the upcoming program in the program guide you wish to cancel and press
SELECT until the check mark (✓) or videotape icon ( ) disappears.
If the program is currently airing, you must delete the event from the
Schedule
menu pane accessed from the
TIMER menu.
Adjusting audio From the MAIN MENU, highlight and SELECT the Audio & Video tab.
From the
AUDIO ADJUST menu pane, you can change:
•
Default Audio and Alternate Audio
•
Audio Left/Right Balance
•
TruSurround
®
Audio Processing (SAT-A65A only)
•
Dolby Digital Output (SAT-A65A only)
•
Output Optimization