Sony SCPH-131 Flat Panel Television User Manual


 
13
English
Games
Certain games that use gun or rifle controllers to shoot at on-screen targets cannot
be used with this product.
Changing the angle of the display panel
When the LCD screen (for PS one
) is connected to the
PS one
console, the display panel can be adjusted for
viewing within the range of motion shown in the chart
at right. If too much pressure is applied to the display
panel, damage to the LCD screen may result. When
changing the angle of the display panel, be careful not to
bend it too far. Also, close the display panel when
the LCD screen is not in use.
Closing the LCD screen
When closing the LCD screen, make sure that there is nothing between the PS one
console and the LCD screen. Also, close the disc cover of the console before closing
the LCD screen. If you close both at the same time, damage to the screen may result.
Transporting the LCD screen
Before carrying the LCD screen, make sure you disconnect it from any cables. If you
drop the LCD screen, personal injury or damage to the LCD screen may result.
Cleaning the LCD screen
For safety reasons, before cleaning the LCD screen, disconnect the AC adaptor from
the electrical outlet.
Cleaning the exterior
Do not use paint thinner or other chemicals to clean the exterior of the LCD
screen as these may damage the surface. When using a commercially
available cleaning cloth, follow the usage instructions supplied with the
cloth.
If the exterior of the LCD screen becomes dirty, soak a soft cloth in a mild
detergent solution diluted with water, tightly squeeze the cloth to remove
the excess liquid, wipe the affected area of the exterior, and finish by wiping
with a dry cloth.
Cleaning the screen
Avoid touching the screen surface except when necessary for cleaning, as
this may damage it.
Do not use a wet cloth to clean the screen. If water gets inside, it may
damage the LCD screen.
If the screen becomes dirty, wipe off the screen surface with a soft, dry
cloth.