Filter
Top Products
6
Setup
Before using your monitor, check that the following accessories
are included in your carton:
• Power cord (1)
• G3 adapter (for Macintosh blue and white system) (1)
• Setup Disk (1)
• Warranty card (1)
• Notes on cleaning the screen’s surface (1)
• This instruction manual (1)
Step 1:Connect your monitor to
your computer
Turn off the monitor and computer before connecting.
Note
Do not touch the pins of the video signal cable connector as this might
bend the pins.
x
Connecting to an IBM PC/AT or compatible
computer
x
Connecting to a Macintosh or compatible
computer
* Connect the supplied Macintosh adapter to the computer before
connecting the cable. This adapter is compatible with the Power
Macintosh G3 computer that has three rows of pins. If you are
connecting to the other version of Macintosh G3 series computer with
two rows of pins or other models, you will need a different adapter (not
supplied).
AC IN
1
(
HD15
)
IBM PC/AT or
compatible computer
to video output
AC IN
1
(
HD15
)
Use the supplied G3 adapter (for blue and white system).
G3 adapter (for blue and white
system) (supplied)*
Power Macintosh G3
to video output