Filter
Top Products
Basic operation
12
1
4
7
3
6
9
2
5
8
0
OK
MENU
Viewing a traditional text service
Using the text menu
You can access more features by using the text menu:
1.
Press the button on your remote control to enter the conventional text
mode.
2.
With the text display on screen, press the MENU button to display the
‘Tele text’ menu.
3.
Press the V or v button to highlight your desired feature, then press the b
button to select.
4.
Press the MENU button to remove the ‘Teletext’ menu from the screen.
The following table explains each feature and its function.
Feature Function
Top/Bottom/Full This feature allows you to enlarge sections of the displayed
page. Press the V button to enlarge the upper half of the
page or v to enlarge the bottom half. Press the OK button to
return the page to normal size. Press the MENU button to
return to the ‘Telet ext’ menu.
Text Clear
(not available in P&T
mode)
Use this feature to watch a TV programme when the text
service is searching for a page. Once the page has been
found, a blue symbol appears in the top left corner of
the screen. Press the button to view the page.
Index Most Text services contain an index page which lists all the
available pages and their 3 digit page number. Press the b
button to display the index page on screen.
Page Overview
(only for TOPText
broadcasts)
TOP-Text pages are divided into two columns. The first
column shows ‘blocks’ of pages and the second shows
‘groups’ of pages. Press the b or B button to select the
desired column, then press the V or v button to select the
relevant ‘group’ or ‘block’ of pages. Press the OK button to
display the chosen pages.
Contrast This feature allows you to adjust the contrast setting of Text
pages. Press the b or B button to increase or decrease the
contrast. Press the OK button to confirm.
NX9-13.fm Page 12 Monday, September 16, 2002 12:29 PM