Filter
Top Products
Digital features
19
OK
The Main menu
CAM Setup
(depending on availability of service)
This feature allows you to access a pay-TV service once you have obtained a
Conditional Access Module (CAM) and a viewing card. Please contact a pay-TV
supplier for details.
For further information regarding the services available, please contact a pay-TV
supplier.
1.
Switch off the TV and unplug from the mains.
2.
Insert the CAM into the socket on the rear of the TV as shown. Take care
not to damage the CAM when inserting.
Note:
If you have already attached the door that covers the rear sockets you will have to
unscrew and remove this to gain access to the CAM socket.
3.
Insert your viewing card into the CAM.
4.
Connect the TV to the mains and switch on.
5.
Press the button on the remote control to obtain the Digital Info display.
6.
Press the BLUE button to display the Main menu.
7.
Press the V or v button to highlight ‘CAM Setup’, then press the OK button to
display the set up menu of the service provider.
Viewing card
and CAM
R/D/D/D
L/G/S/I
ANALOGUE
1
2
DVD
VCR
s
3
3
(SMARTLINK)
DIGITAL
OPTICAL OUTPUT
MODEM . . . 5V 200mA
NX14-23.fm Page 19 Monday, September 16, 2002 12:55 PM