Filter
Top Products
16 Chapter 3 Operation
Chapter 3 Operation
This section describes users of the LCD (display), and procedures for loading
cartridges in the magazine, using the drive unit, and handing magazines and
cartridges.
Menu Settings and Checks
Certain machine settings can be made and viewed from the LCD Menu
screen, including model and firmware version display and the current SCSI
ID setting of the machine.
The Menu screen is controlled by the following procedure.
Note:
The magazine should be removed before switching display to the Menu
screen. When the magazine is inserted into the autoloader, the Menu screen
can only be displayed when the LCD shows “Ready”. To change the
language setting, the magazine must be removed.
1 Press and hold the SELECT button for 5 seconds.
The display changes to the Menu screen.
z Version
Auto Load
Unload
Contrast
Orientation
Language
Menu Screen
2 Press the SELECT button to move the cursor (z) among the menu items.
3 Press ENTER to display the setting screen for the selected item.
4 Choose the desired setting for the selected item as described in the
following descriptions of the choices for each setting screen.
If no further action takes place for 10 seconds, the menu is exited and
display returns to normal.