Filter
Top Products
Chapter 4 Care and Maintenance 29
Chapter 4 Care and Maintenance
Taking Care of the Autoloader Unit
Safety Considerations
■ Power
• Be sure to use only 100-120/200-240 V AC.
• Avoid plugging into the same outlet as high-current equipment like copiers
or shredders.
■ Power Cable Precautions
• Do not crush the cable or place heavy items on it. If the cable insulation
appears worn or broken, do not use the cable.
• Always unplug the cable by holding the plug: never pull the cable itself, as
it will break.
• If the unit is not being used for a long time, unplug the cable from the
outlet.
• Once a year, please clean the power plug.
■ Other
• When the magazine is not installed, avoid putting fingers in the magazine
insertion slot.
Avoiding Damage
■ Avoid shock and vibration
Intense shock, such as from dropping the unit, will damage it.
■ Environmental considerations
Do not store or use the unit in locations subject to:
• high humidity
• excessive dust
• high temperature
• intense vibration
• direct sunlight
• sudden changes in temperature
■ Proper ventilation
To avoid overheating, install the unit where it will have free air circulation
around the case, and do not cover it during operation. The unit can
malfunction if the internal temperature rises too high.