Filter
Top Products
15
US
US
4 Attach the Table-Top Stand with
stand plate to the middle position,
and fix with screws (M6×32)
(supplied with the TV.)
5 Take the same procedure for the
other side of the Table-Top Stand.
6 Attach stand covers (supplied with
the TV.)
Note
• Two or more people are needed to carry out this
installation.
• Ensure that there are no objects in front of the
TV.
To bundle the cables
XBR-75X910C/65X900C
XBR-55X900C
*1 Location of cable clamper when the Table-Top
Stand is attached to middle position.
*2 Location of cable clamper when the Table-Top
Stand is attached to edge position.
Note
• To detach the cable clamper from the TV, press
the top of the clamper , then pinch as
illustrated.
M6 × 32
1.5 N∙m/1,5 N∙m
{15 kgf∙cm}
Stand cover
IR Sensor
3D Sync
Transmitter
(XBR-
75X910C
only)
*
2
*
1
*
2
*
1