Sony XBR65X900C Flat Panel Television User Manual


 
22
US
Installing the TV to the Wall
Your TV can be mounted on a wall using a Wall-Mount Bracket (supplied with the TV) out of
the box as packaged.
Prepare the TV for the Wall-Mount Bracket before making cable connections.
For product protection and safety reasons, Sony strongly recommends that installation of
your TV on the wall be performed by qualified professionals. Do not attempt to install it
yourself.
Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient
expertise is required in installing this TV, especially to determine the strength of the wall for
withstanding the TV’s weight.
The length of the screw for Wall-Mount Bracket differs depending on the Wall-Mount Bracket
thickness. Please see below illustration.
Note
Read the supplied Safety Booklet for additional safety information.
See page 3 (Safety Information) and page 6 (Precautions) on WALL-MOUNT BRACKET before carrying out
Wall-Mount Bracket installation.
When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the
original holes on the rear of the TV.
Using the supplied Wall-Mount Bracket
To Customers
Sufficient expertise is required for installing this product. Be sure to subcontract the
installation to Sony dealers or licensed contractors and pay special attention to safety
during the installation. Sony is not liable for any damages or injury caused by mishandling
or improper installation, or installing any other than the specified product. Your Statutory
Rights (if any) are not affected.
To Sony Dealers and Contractors
Sufficient expertise is required for installing this product. Be sure to read this instruction
manual thoroughly to do the installation work safely. Sony is not liable for any damages or
injury caused by mishandling or improper installation.
Wall-Mount Bracket
Screw (M6)
8 mm - 12 mm