Filter
Top Products
DVR-IP4CF
21
8.3 Camera Setup
1. Cursor (>) position indicates the current function selected.
2. Press《←》and《→》button to move the cursor.
3. Press《ENTER》button to proceed.
4. Press《MENU》button to exit.
5. “Camera Setup” is situated on the second menu layer. Under this menu layer
user may setup camera name (camera name for CH1, CH2, CH3 and CH4),
standard camera setup, etc.
6. Press《ENTER》button to change the camera view combination (select to view
the desired channel).
(It consists of 16 different optional camera view combinations)
1) Select (- - - -), all cameras are disabled (no image display).
2) Select (1 2 3 4), all cameras are operational (quad image display).
3) Select (- - - 4), only camera four is operational (CH4 image display only).
7. When proceeding “CH1 TITLE”, press《ENTER》button to show the display
CAMERA SETUP ■■
> CAMERA ENABLE 1234
CAMERA TITLE ----
CAMERA SETTING
CH1 TITLE CAMERA1
CH2 TITLE CAMERA2
CH3 TITLE CAMERA3
CH4 TITLE CAMERA4
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT