Filter
Top Products
DVR-IP4CF
51
9.4.3.2 DHCP
The “DHCP” is automatically set as the default network setting of the Network
DVR. When a Network DVR is connected into the LAN, it will issue DHCP
packets to request an IP address that is dynamically assigned by the DHCP server.
If it is unable to get a DHCP address on a limited tries, the Network DVR will
assign a default IP address such as “169.254.1.13”.
9.4.3.3 Connect to ADSL by PPPoE mode
To setup follow the steps below:
1. After setup, rebooting enables automatic connection to ADSL.
2. Enter the “Username” and “Password” fields with the account and password
provided by the ISP.
3. If item “Send mail after connected” is selected, the mail will be automatically
sent when connected to the ISP.
4. Click “OK” button to save the settings.
Note: In order to activate the function, it is necessary to reboot the device after the
setup.
ADSL Setting Display
If the Network DVR and ADSL modem are connected by a hub, the user can select
item “Dial On Power Up” to perform the connect operation. On contrary, if the
Network DVR and ADSL modem are connected directly, then please note the
following steps below:
1
2