Filter
Top Products
3-16 Sun Fire™ B1600 Chassis and B100s, B100x, and B200x Blade Product Notes • May 2004
4321917: ACPI Resource Conflicts Unnecessarily Reported
During the booting of a B200x blade you might see the following message briefly
displayed:
If you see this message in respect of a B200x blade, you can safely ignore it.
3.3.3 Other Issues
4877872: Difference Between the Network Interface Assignments
Displayed by the BIOS, DCA, and Solaris x86 Software on a B200x
The B200x blade has two dual-port BCM5704s Gigabit Ethernet chips. Each
individual port is connected to one of the Ethernet switches in the B1600 chassis, and
the BIOS takes responsibility for assigning the MAC addresses to the Ethernet ports
(see
FIGURE 3-1).
Warning: Resource Conflict - both devices are added
NON-ACPI device: PNP0C01
NON-ACPI device: PNP0C01
Memory: 9FC00-9FFFF, 3FFF0000-3FFFEFFF, 3FFFF000-3FFFFFFF,
Memory: 9FC00-9FFFF, 3FFF0000-3FFFEFFF, 3FFFF000-3FFFFFFF,
FEC00000-FECFFFFF, FEE00000-FEE00FFF, FFF00000-FFFFFFFF
ACPI FEC00000-FECFFFFF, FEE00000-FEE00FFF, FFF00000-FFFFFFFF
device: PNP0C01
ACPI device: PNP0C01
Memory: 9F000-9FFFF, E0000-EFFFF, 40FFC00-4D8BF373,
5 Memory: 9F000-9FFFF, E0000-EFFFF, 40FFC00-4D8BF373,
6C5737C-FFFFFFFF
56C5737C-FFFFFFFF