Sun Microsystems B100X TV Video Accessories User Manual


 
Chapter 4 SPARC Solaris 4-3
4726915: SunVTS will not start because of missing XML libraries
To run SunVTS you need to load the SUNWlxml and SUNWlxmlx packages. These
are not loaded by default in Solaris 8, therefore you must add them manually
from the supplemental CD supplied with Solaris 8 HW 12/02. They are located in
the following directory on the CD: XML_Libraries_2.4.12/Product.
To make the contents of this CD available via NFS, on the NFS server, type:
Then, to load the packages onto the server blade, access the blade’s console, and
type:
4779970: When booting a blade with the kernel debugger (kadb) enabled, a
warning message appears
If you boot a blade with the kernel debugger enabled, you will see the message
WARNING: todblade: kernel debugger detected: hardware
watchdog disabled”. Because you have enabled the kernel debugger, the
kernel watchdog functionality cannot be used. The message simply warns you of
this fact. There is no other effect upon the operating system functionality.
4803500: If you insert a blade less than 10 seconds after removing it, the service
LED is lit on the blade and chassis, and service required messages are logged
After using the removefru command to make a blade safe for removal, remove
the blade, and then wait at least 10 seconds before re-inserting it or before
inserting another blade into the same slot.
Shared library patches for C++ are not included in Solaris 8 HW 12/02.
The 32-Bit and 64-bit shared library patches for C++ (libC.so.5,
libCrun.so.1, and libdemangle.so.1) are not included in the Solaris 8
HW 12/02 release. They are available on http://sunsolve.sun.com. The
numbers for these patches are: 108434-10 and 108435-10.
# share -F nfs /cdrom/solaris8_hw1202_suppcd
# mount -F nfs server:/cdrom/solaris8_hw1202_suppcd /mn
# pkgadd -d /mnt/XML_Libraries_2.4.12/Product SUNWlxml SUNWlxmlx