SUPER MICRO Computer 5017P-TF Home Theater Server User Manual


 
Chapter 6: Advanced Chassis Setup
6-3
6-3 Removing the Chassis Cover
Removing the Chassis Cover
1. Power down the system and disconnect the power cord from the back of the
power supply.
2. Remove the ve screws that hold the chassis cover in place. There are two
screws on each side of the chassis, and one screw on the back.
3. Once the screws have been removed, lift the cover upward to remove it from
the chassis.
Caution: Except for short periods of time, do NOT operate the server without the
cover in place. The chassis cover must be in place to allow proper airow and prevent
overheating.
Figure 6-2. Removing the Chassis Cover
1
2
1
3
1
2
1
2