Filter
Top Products
1-2
S
UPERSERVER 6014L-M User's Manual
1-2 Serverboard Features
At the heart of the SuperServer lies the X6DLP-EG2, a dual processor serverboard
based on Intel's E7520 chipset and designed to provide maximum performance.
Below are the main features of the X6DLP-EG2.
Processors
The X6DLP-EG2 supports single or dual Intel® Xeon® LV or ULV processors in
479-pin PGA sockets. Please refer to our web site for a complete listing of sup-
ported processors (www.supermicro.com).
Memory
The X6DLP-EG2 has eight (8) 240-pin DIMM sockets that can support up to 16 GB
of registered ECC DDR2-400 SDRAM. The memory bus is a dual-channel confi gu-
ration and memory modules must be installed in pairs (two at a time). All memory
modules used to populate the system should be the same size, type and speed.
Serial ATA
The 6300ESB South Bridge portion of the chipset includes a Serial ATA controller
that supports a four-port SATA subsystem (RAID 0, 1 and 10 supported). The
Serial ATA drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the Serial ATA drives.
PCI Expansion Slots
The X6DLP-EG2 has two 64-bit, 66 MHz (3.3V) PCI-X slots, two x8 PCI-Express
slots and one 32-bit, 33 MHz (5V) PCI slot. When confi gured as the X6DLP-EG2,
the 64-bit, 133 MHz PCI-X slot is available with the use of a riser card (included
with the system). (Alternatively, the optional CSE-RR1U-EL riser card may be used
to support an add-on card in the x8 PCI-Express slot.)
Ethernet Ports
The X6DLP-EG2 has one Intel 82573V and one Intel 82573L single port Ethernet
controllers to support two Gigabit LAN ports. (Supports 100/1000 BASE-T, RJ45
output.)