Filter
Top Products
5-16
SUPERSERVER 6014P-8/6014P-8R/6014P-82R/6014P-82 User's Manual
GLAN1/2 (Ethernet Ports)
Two gigabit Ethernet ports are lo-
cated beside the VGA port.
These ports accept RJ45 type
cables.
Power Button
The Power Button connection is
located on pins 1 and 2 of JF1.
Momentarily contacting both pins
will power on/off the system. This
button can also be configured to
function as a suspend button (see
setting in BIOS). To turn off
power in suspend mode, depress
the button for at least 4 seconds.
Pin
Number
1
2
Definition
PW_ON
Ground
Power Button
Pin Definitions
(JF1)
Chassis Intrusion
A Chassis Intrusion header is lo-
cated at JL1. Attach the appropri-
ate cable to inform you of a chas-
sis intrusion.
Pin
Number
1
2
Definition
Intrusion Input
Ground
Chassis Intrusion
Pin Definitions (JL1)
UID Button & UID LED
A Unit Identifier button/LED is lo-
cated next to the VGA port on the
rear of the chassis and a UID LED
and button (separate) are located
on the front control panel. The UID
LED connection is located on pins
3 and 4 of JF1. Refer to the table
on the right for pin definitions and
to page 5-21 for details.
Pin
Number
3
4
Definition
Front_UID
UID_LED
UID & UID_LED
Pin Definitions (JF1)