SVAT Electronics CVDVR200 DVR User Manual


 
INTRODUCTION
Thank you for purchasing the SVAT DVR200 DVR system. To ensure that you are
getting the most out of this system please read this entire manual before you
install the system. Also, be sure to keep this manual for future reference in case
any problems or questions should arise. Enjoy your DVR200!
IMPORTANT SAFETY INFORMATION
When using your DVR equipment, basic safety precautions should always be fol-
lowed to reduce the risk of fire, electric shock and personal injury. Please read
the followings before using your equipment:
1. Read and follow all instructions carefully.
2. Follow all warnings and instructions on the product.
3. Unplug the product from the power outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water.
5. Do not place this product on an unstable cart, stand or table.
6. Do not allow anything to rest on the power cords. Do not place this product in
a location where the cords can be stepped on or where someone can trip over
them.
7. Do not use this product near an area where there is a potential of gas leaks or
near any explosive fumes.
8. Do not place this product near or over a radiator or any other heat source.
9. Use ONLY the power cord supplied with the system.
10. Do not overload the wall outlet or power cord where the power cord is
installed. This can result in fire or electric shock.
11. This equipment is to be opened by ONLY a qualified serviceperson. There are
no user serviceable parts inside. Opening this equipment may expose you to
dangerous voltage and other risks. Incorrect re-assembly of this equipment may
result in electric shock.
12. Avoid spilling liquid on this equipment and do not insert any objects through
the ventilation slots.