Filter
Top Products
- 27 - EN
SEARCH
Make sure ...
•
The unit must be turned on.
•
Insert a tape.
This function allows you to search easily a beginning
point that you want to review by rewinding or fast
forwarding.
NOTE:
•
Zero Return WILL NOT work on a blank tape or
a blank portion of a tape.
1 Stop a tape at your desired point
Rewind or fast forward the tape to the beginning
point at which you want to review.
2 Reset the counter to 0:00:00
Hit [C.RESET] repeatedly.
3 Begin recording or playback
Press [RECORD] or [PLAY O].
Hit
[STOP C]
when recording or playback is com-
pleted.
4 To activate “ZERO RETURN”
Hit [SETUP].
Press
[K / L] to point to “ZERO
RETURN”, then hit [ENTER].
The unit will begin rewinding and
the counter will appear on the TV
screen.
The tape will automatically stop when the counter
returns to 0:00:00 (approx.).
TV/VCR
ZERO RETURN
The Time Search function makes it possible to quick-
ly advance the tape to your desired position simply
by entering the exact amount of playback time you
want to skip.
NOTE:
•
Time Search can be set up to a maximum of 9
hours 50 minutes (9:50) by 10 minutes at a time.
TV/VCR
TIME SEARCH
In the example below: To watch a program before/
after 2 hour 50 minutes from the present position, in
either direction.
1 Select “TIME SEARCH”
Hit [SETUP].
Press
[K / L] to point to “TIME
SEARCH”, then hit [ENTER].
2 Enter your desired time
Press
[K / L]
until your desired time
appears. (Example: “2:50” stands for
2 hours 50 minutes)
If you wish to cancel the Time
Search at this point, hit [SETUP].
3 Begin Time Search
By pressing [s
/
B], the unit will rewind or fast for-
ward to the specified point.
The time counts down during the search. When the
display shows
“
0:00
”
, the tape will start playback
automatically.
TO CANCEL DURING TIME SEARCH
Press [
C / A
STOP/EJECT] on the unit or
[
STOP
C
].
This will delete the selected time.
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
B ZERO RETURN
TIME SEARCH
INDEX SEARCH
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
B TIME SEARCH
INDEX SEARCH
TIME SEARCH
2 : 50
PICTURE SEARCH
This feature is very useful in finding or skipping over
a particular scene on a tape. In this mode, the sound
will be muted.
1 Start Picture Search
During playback, press [D] or [E] to view at a
high speed (in forward/reverse).
2 Change searching speed
Press [D] or [E] again to view at super high
speed (in the LP/SLP modes only).
TV/VCR
NOTE:
•
Tapes recorded in the SP or LP mode will normally
display a noise bar on the TV screen and the pic-
ture may revert to Black and White.
3 Return to normal speed
Hit [PLAY O].