TANDBERG 1000 MXP Flat Panel Television User Manual


 
TANDBERG 1000 MXP
10
3. Plug for headset (optional)
The TANDBERG 1000 has a
2.5mm 3-pole mini-jack connector
at its left side marked with a
headset symbol. This allows the
user to connect a standard
telecommunications headset to
the system. Pressing the push
button in front of the unit toggles
between headset audio and
internal speaker and microphone
audio.
4a. LAN cable
To use the system on LAN,
connect a LAN cable from the
Ethernet' connector on the system
to the LAN.
4b. Wireless LAN - Insert PC
Card
Remove the 'dummy' card
by pressing the 'Eject'
button next to the slot.
Insert the Wireless LAN
PC Card.
Note! Make sure the card is
inserted in the right direction
(with the product logo
towards you). Push the card
into the slot until the 'Eject'
button pops up.
See Wireless LAN Settings
for
configuration.