Filter
Top Products
PAGE 9/22
119077.01 TELEPRESENCE T3 ROOM INSTALLATION GUIDE 12.08
TANDBE RG
Telepresence T3
Note! These items are included in the Immersive Room Package.
What to unpack: Unpack the three boxes marked
• Walnut wall panels T3
• Walnut wall panel corners T3
• Walnut wall panel Profiles T3
Box contents:
• The box marked Walnut wall panels T3 contains aluminum baseboards
(not shown), in addition to the items shown to the upper left.
• The box marked Walnut wall panels corners T3 contains corner base-
boards (not shown), in addition shown to the lower left.
• The box marked Walnut wall panels Profiles T3 contains border lists, in
addition to the following five kinds of profiles:
Note! It is of utmost importance that you mount the corners first.
Do as follows:
1. Start at the bottom and build your way up.
2. Fasten the profile E vertically on the lattice next to the glass walls (it will be
the border between the wooden panels and the glass walls).
3. Continue by cutting the profile B in appropriate lengths (from the edge of
the corner profile to the radius).
RO OM IN S TA LLATION G U ID E
ThE WOO DEN PA NEL S
These elements are located in the box
marked Walnut wall panels T3.
These elements are located in the box
marked Walnut wall panel corners T3.
8×
2×
24×
16×
4×
2×
8×
16×