Filter
Top Products
ADVANCED PLAYBACK
14
IMPORTANT
All descriptions refer to DVDs. Function and display may vary if other types of discs are used.
VIDEO MODE
The video output can be set to “YCbCr”,
“YPbPr”, “S-VIDEO”, or “RGB”.
OSD (On Screen Display)
Press DISP to switch between “title played”, “title
left”, “chapter played”, “chapter left”, and “display
off”.
SUBTITLE
When SUBTITLE is pressed, the display shows
“SUBTITLE 01/XX XXXXX”. "01" designates the
language number, "XX" the total number of
languages, and “XXXXX” designates the
country's language (the number of languages
depends on the disc). A selection of up to 32
languages is available on the screen.
REPEAT
Press REPEAT once to choose on-screen which
chapter to repeat. Press once more to choose
the title to be repeated, and press a third time to
choose to repeat all, and four times to cancel the
repetition.
A-B REPEAT
Press A-B RPT to set up the starting point and
again to set the stop point and complete the set-up.
The section between A and B will be repeated.
Press the button a third time to cancel.
SLOW
Press SLOW to play a disc slowly forwards or
backwards. The speed changes every time you
press SLOW. Press ENTER/PLAY to return to
normal playback.
Note:: This function cannot be used for CD and
MP3.
PROGRAMME
Press PROG to enter programme mode. Enter the
number at the desired programme on track or title
and chapter and move the cursor to START to start
the programme. If you wish to cancel the function,
press STOP and then ENTER/PLAY.
STEP
Press STEP to step a single frame/picture
forward during playback. Pres STEP several
times to step several frames/pictures forward.
Press PLAY to resume playback
TIME (search)
Press TIME once, to view the search menu, and
press once more to cancel the function. In the
search menu, use the UP/DOWN- and DIGIT-
buttons to make the desired choice. Press the
ENTER/PLAY button to confirm the choice.