Filter
Top Products
English - 14 -
Note: You can enable subtitles by pressing the (**
for UK) or GREEN (* for EU countries)buttons.
Press the “ M ” button to display the main menu,
highlight the Setup and then Language menu using
“ ” or “ ” button and press the OK button to display
the “Language settings” menu.
Highlight the “Subtitle” item in “Language settings”
menu and use ” or “ button to set Subtitle to the
desired language.
If “Subtitle” is on and a language option is set,
pressing the TELETEXT ( ) button causes the
following warning message display on the screen (*
for UK only):
Digital Teletext (** for UK only)
• Press the TELETEXT ( ) button.
• The digital teletext information appears.
• Operate it with the coloured buttons, cursor buttons
and OK button.
The operation method may differ depending on the
contents of the digital teletext.
Follow the instructions displayed on digital teletext
screen.
• When Press “SELECT” button or similar message
appears on the screen, press the OK button.
• When the TELETEXT ( ) button is pressed, the
TV returns to television broadcasting.
• With digital terrestrial broadcasting (DVB-T), in
addition to digital teletext broadcasting together with
the normal broadcasting, there are also channels
with just digital teletext broadcasting.
• The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting is
the same as the aspect ratio of the picture viewed
previously.
• When you press the TELETEXT ( ) button again,
the digital teletext screen will be displayed.
Analogue Teletext
Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
“TELETEXT” explanations.
Widescreen
Depending on the type of the broadcast being
transmitted, programmes can be viewed in a number
of formats. Press the “SCREEN” button repeatedly
to select between to change zoom mode.
When Auto is selected, the format being displayed is
determined by the picture being broadcast.
PLEASE NOTE : Menu size changes depending on
the chosen image size.
IDTV Menu System
The IDTV menu can only be viewed when watching
digital terrestrial broadcasting. Press the “
” button to turn IDTV on while the TV is in analogue
mode.
Press the “ M ” button. The menu below appears on
the screen:
Channel List
Using the “ ” or “ ” button on the remote control,
make sure that the first item, Channel List, is
highlighted and press the OK button to display the
Channel List.
Channel List is the place where the channels are
managed.
Navigating the Entire Channel List
Press “ ” or “ ” button for selecting the previous or
next channel. You can press P+ or P- button to move
page up or page down.
To watch a speci c channel, highlight it using “ ”
or “ ” button and then press “ OK ” button, while the
“Select” item on Channel List menu is highlighted by
using “ ” or “ ” button.
[GB]_MB35_COST_26857WS_1810UK_PANEUIDTV_SILVER1_TECHNIKA_10064934_50155702.indd 14 02.10.2009 09:31:42