Technika LCD26-920 Flat Panel Television User Manual


 
English - 24 -
Headphone
Press or button to select Headphone . Press
button to view the headphone menu.
Headphone sub-menu options are described below:
Volume
Press or button to select Volume . Press
button to increase headphone volume level. Press
button to decrease headphone volume level.
Headphone volume level can be adjusted between
0 and 63 .
Headphone Sound (optional)
Press or button to select Headphone Sound .
Using or button, you can select Main, PIP/PAP,
Active or Inactive.
Main : Main window sound.
PIP/PAP : PIP/PAP window sound.
Active : Sound of the current selection.
Inactive : Sound of the currently inactive window.
Sound Mode (optional)
Press or button to select Sound Mode . Using
or button, you can select Mono, Stereo, Dual I
or Dual II mode, only if the selected channel supports
that mode.
AVL
Automatic Volume Limiting (AVL) function adjusts the
sound to obtain xed output level between programmes
(For instance, volume level of advertisements tend to
be louder than programmes).
Press or button to select AVL . Press or
button to set the AVL as On or Off .
Spdif Out
Press “ or “ button to select Spdif Out . Press “
or “ button to set the Spdif Out . as On or Off .
Note : If Spdif Out is set to On, headphone will be
disabled.
SRS TruSurr XT (optional)
By pressing or select SRS TruSurr XT .
Press or button to set SRS TruSurr XT as
on or off.
Note: If you set SRS TruSurr XT as On, some features
in the Sound menu can be unavailable to be set.
Store
Press ” or ” button to select Store. Press
or OK button to store the settings.Stored... will
be displayed on the screen.
Feature Menu
Pip-Pap
In the Feature menu, highlight PIP item by pressing
or buttons. Press button to enter PIP
submenu:
Using or button, you can switch to PIP, PAP
mode or turn off the feature.
If the TV is switched to PIP or PAP mode, Pip-Pap
submenu will change accordingly and the following
settings will appear on the same menu screen.
Note that if you switch to PAP mode by using Pip-Pap
setting, only Source and Swap options will be active
among the menu settings.
Pip-Pap
This line controls Pip/Pap modes. Use or
buttons to switch the TV to Pip , Pap or Off .
Pip Size
Using this setting, you can set the size of the Pip
window. Press or button to highlight Pip
Size item. Use or button to set Pip Size to
Small or Large.
[GB]_MB35_COST_26857WS_1810UK_PANEUIDTV_SILVER1_TECHNIKA_10064934_50155702.indd 24 02.10.2009 09:31:50